Hi,
I recently bought a FX 8350 and tried to run Prime95(small FFTs & Blend test) with all of my settings at stock to see how the temps look like at full load. The results are one of the workers always get delayed and one of them always get a FATAL ERROR in just a few minutes.
My system specs is:
AMD FX 8350
Cooler Master Seidon 120V
Corsair Dominator Platinum DDR3 1866MHz 16GB (2x8GB) @1333MHz 9-9-9-24
Gigabyte GA-970A-DS3P
Asus R9 280x DCUII TOP
Samsung 840 EVO 120GB SSD SATAIII
Seagate Baraccuda 500GB 7200RPM SATAII
Seasonic P760 760W 80Plus Platinum
All of the settings in the BIOS are in Default. I have tried to use the XMP profile of the Corsair Dominator Platinum to run it at 1866MHz with 9-10-9-27 and 1.464V, and I'm still experiencing the same errors in Prime95(small FFTs & Blend test). The rated voltage at 1866MHz is 1.5v according to Corsair - but what I'm getting at the XMP profile with auto settings is 1.464V. I tried to set it manually with small increments until I got 1.5V reading at the BIOS with 1.53V at settings - it's really weird. But with that settings - it still fails Prime95 :(
But when I swapped my memory modules out and tried to use my old Kingston DDR3 1333MHz 4GB (2x2GB) - my system ran pretty well on Prime95 on both tests.
I haven't tried to run my Corsair RAMs on memtest yet - ever since I bought this. But I think this is the problem or maybe it's not. I have used these memory modules for two months already but I haven't encountered BSOD or hardware failures yet. FPS gaming and programming are what I usually do on my PC.
I'm trying to think out the possible problems:
1. Bad BIOS settings
2. Faulty memory modules :'(
3. Incompatible memory module with AMD FX Platform
4. Bad motherboard
Thank you for reading. I hope you can help me with this problem. I'm getting worried at my system right now :(
I recently bought a FX 8350 and tried to run Prime95(small FFTs & Blend test) with all of my settings at stock to see how the temps look like at full load. The results are one of the workers always get delayed and one of them always get a FATAL ERROR in just a few minutes.
My system specs is:
AMD FX 8350
Cooler Master Seidon 120V
Corsair Dominator Platinum DDR3 1866MHz 16GB (2x8GB) @1333MHz 9-9-9-24
Gigabyte GA-970A-DS3P
Asus R9 280x DCUII TOP
Samsung 840 EVO 120GB SSD SATAIII
Seagate Baraccuda 500GB 7200RPM SATAII
Seasonic P760 760W 80Plus Platinum
All of the settings in the BIOS are in Default. I have tried to use the XMP profile of the Corsair Dominator Platinum to run it at 1866MHz with 9-10-9-27 and 1.464V, and I'm still experiencing the same errors in Prime95(small FFTs & Blend test). The rated voltage at 1866MHz is 1.5v according to Corsair - but what I'm getting at the XMP profile with auto settings is 1.464V. I tried to set it manually with small increments until I got 1.5V reading at the BIOS with 1.53V at settings - it's really weird. But with that settings - it still fails Prime95 :(
But when I swapped my memory modules out and tried to use my old Kingston DDR3 1333MHz 4GB (2x2GB) - my system ran pretty well on Prime95 on both tests.
I haven't tried to run my Corsair RAMs on memtest yet - ever since I bought this. But I think this is the problem or maybe it's not. I have used these memory modules for two months already but I haven't encountered BSOD or hardware failures yet. FPS gaming and programming are what I usually do on my PC.
I'm trying to think out the possible problems:
1. Bad BIOS settings
2. Faulty memory modules :'(
3. Incompatible memory module with AMD FX Platform
4. Bad motherboard
Thank you for reading. I hope you can help me with this problem. I'm getting worried at my system right now :(
Aucun commentaire:
Enregistrer un commentaire