Wie Standard-Profil bei K50 einstellen?

Hi,



bisher habe ich lediglich den Hardware-Modus genutzt. Soweit funktionert alles ganz gut.



Da es viele Games zurzeit sind, möchte ich gerne wie bei meine Logitech den Software-Modus nutzen.



Habe insgesamt 3 Profile. Eins davon ist für Office. Wenn ich nun ein Spiel starte, schaltet die Corsair-Software richtig um. D. h. abhängig vom Spiel, öffnet sich das richtige Profil.



Problem ist nur, wenn ich das Spiel schließe, bleibt dieser Profil offen. Ich muss jedesmal in der Software reingehen, um manuell den "Office"-Profil zu aktivieren. Es besteht leider nicht die Möglichkeit, dort ein Standard-Profil einzustellen.



Das halte ich nicht besonders für userfreundlich. Man bietet diese Komfort-Option an, um den User Arbeit zu nehmen (automatische Profil-Umschaltung) und nach dem Spielen muss er jedesmal nochmal die Software öffnen, um erneut in den Office-Modus (oder Standard-Modus) zu kommen. Wo soll da der Sinn liegen?



Logitech bietet diese Option und alles läuft einwandfrei und komfortabel.



Habe schon versucht mit dem Office-Profil als Anwendung "explorer.exe". Geht auch nicht. Es bleibt immer der Profil des zuletzt gespielten Spiels offen.



Hat da einer das schon mal festgestellt und eine Lösung dafür? Für mich sieht es danach aus, dass die Entwickler der Software hier nicht zu Ende gedacht haben...



Wäre für Hilfe sehr dankbar. Sonst ist das eine klasse Tastatur, bin zufrieden damit :biggrin:

750D Bottom-Front Filter?

I know this case has 2 filters, one located behind the removable front panel and then the one located at the bottom-rear of the case where the PSU is located...but nothing up front for the 2 120mm fan locations? Seems kindve odd. Those two front fans would pull in more air than a single fan that the PSU uses which would make sense to filter that air.

Corsair Vengeance 2000's Falling Apart :(

Hey everyone



I've had a set of Corsair Vengeance 2000's for over two years now. I've been very careful with them, but even so, they've cracked, a bit of them has broken off around the screw hole on the left side, and the right side has a crack as well. They still work ok, but it seems to be, especially after reading other posts here, that the build quality of this headset isn't very good at all :( What's even worse is that I am just out of the warranty period so I can't get them replaced. I'm most concerned that they're going to fall apart more than they are. Are they likely to break further? Am I best off just buying a new headset? I've really enjoyed using the 2000's and I'm pretty disappointed that a headset costing me over £100 can break so easily.



Thanks for reading.



CHokKA

PC Domination - 2015

Hello everyone!



I am wondering if there is going to bo another PC Domination this year?

Last year I was too late for it. :biggrin:

K70 RGB Summit1G (Holiday Giveaway Profile)

Back in December I was asked to create four profiles for Corsairs Holiday Giveaway Competition. This is one for the popular streamer/counter-strike player Summit1G. Based on a few ideas he'd pitched to Corsair, this is what I came up with.



Includes T and CT modes for CS:GO as well as script macros on the numpad. (Requires the Dev Console to be enabled).

YouTube

Layout:





Download Link:

http://ift.tt/1afIbGV

Since the latest update .prf's now include all my devices (K70, Sabre, M65) in the same file.

Attached Files

Summit1G.prf (207.0 KB)

250D + H100i Fandirections

Hi,



completely new to the forum and my last built is years ago so apologies for the noob question.



I'm just waiting for my parts to arrive and I was wondering what Corsair recommends when it comes to fan direction in the 250D.



Should the 2 fans on the radiator of the H100i:

push air in / pull air in?

push air out / pull air out?



Thanks in advance,



M

H2100 hear myself and loud buzzing noise

I've had problems with this headset ever since i got it. I can both hear myself loudly and hear a loud buzzing noise. Both when charging and not charging the headset.



Is there ANY way to mute the mic so i wont constantly hear everything around me. The mic picks up every sound in the house + neighbors. Even my breathing is very annoying to listen to. And the buzzing noise. It's unbearable.



My charging cable broke so i got sent a new headset, both have had the same problems. So i doubt it's something wrong with the actual headset.



Things I've tried:



Disabled and enabled "listen to this device"

Disabled and enabled Microphone check in the software (version 2.0.35)

Disabled the mic in "recording devices" and the buzzing disappeared



If there's any logic here... The "Microphone check" option is there for a reason right? To check the mic? the volume, how it sounds etc... so if there's any reason and logic here the mic should be ALWAYS on. Right? I've heard people say "there's nothing you can do". But to me that makes absolutely no sense what so ever. Just because of the feature you have in the software. Am i wrong to think that?



Any help from anyone would be greatly appreciated.



If any other information is needed I will do my best to provide it.

My 8350 isnt cooling right?

didnt know how to put it on the title but basically the h100i is at 34c but the 8350 is at 40c(these are idle temps). even though it is at 4.5ghz im not sure if im doing something wrong.

Windows 10 technical Preview 10049

Any one got corsair link working with build 10049? tried re installing but no luck :(

K70 RGB Please Help. Just got the keyboard.

Hi, I just picked up the keyboard and ran into a problem. I downloaded a profile from the forums and everything looked like it was going well, until i clicked out of the "CUE" software window. When i did it reset back to the Red and blue waves across the keyboard, And the profile i downloaded only works when i have the "CUE" software clicked on, the profile wont work when i click outside the window, PLEASE HELP.

New help with power supply ability ...

I would like to get the following video card:

http://ift.tt/1Ctf0JA

and I have a Corsair HX850W p/s.



The video card has (8pin + 8pin + 6pin) power connections, the card can use up to 450W of power and up to 600A of current.



My question is can this p/s handle this video card plus my i7-3770k and four hdd's and two ssd's, and a dvd and a Sound Blaster Z?



I am using the Lian-Li A77 case with six fans and two fans on the cpu cooler.



Thanks in advance. :confused:

[REQUEST] Static Red Rainbow

Hi,

I would like to request a profile that does this:



The background(static) lighting is a light red and every 5 seconds a rainbow flows through the keyboard.



Someone has this profile in a video but I can't seem to find it :P

http://ift.tt/1G3xtQY

Thanks :)

Can't for the life of me get CMD16GX3M4A2666C12 to work with Rampage IV Extreme

Greetings,



I'm having huge problems with getting CMD16GX3M4A2666C12 to work with my Asus Rampage IV Extreme motherboard.



Running the X.M.P profile gives me AF debug error and no boot. I have tried to run 2600MHz @ 12-13-13-35-2T @ 1.65 without the default X.M.P BCLK overlock of 125MHz but it won't boot at all.





I've also tried to lower myself to 2400MHz and trying to run 2133MHz @ 9-11-10-27-2T @ 1.65 but nothing. On 2133MHz it will POST but is not able to boot neither memtest86+ nor Windows without rebooting on itself.





Currently I'm running as low as 1600MHz @ 7-8-7-24-1T but this gives me error in memtest86+ on test 6, but not on all passes. But also Intel Burn Test tells me my system is not stable.





I did previously have a set of CMT16GX3M4X2133C9 and they managed to run the X.M.P profile with 2133MHz @ 9-11-10-27-2T @ 1.5 without any issues?







Any recommendations of how I'm supposed to get these to work? Settling for a lousy 1600MHz @ CL9 seems stupid considering the price of this kit...

K70 RGB How do i upload profiles?

Hey! I got some awesome profiles that I want to share with the community. The problem is that I don't know how to upload them for the community to download. When i press export on the CUE, it exports all the profiles into one .prf file. So the question is: how do I export only one profile?

H100i LED Flashing on and off

Hi I'm have a problem with my corsair H100i, The logo is flashing on and off in 3 and 7 second intervals, the fans are doing the same thing. The pump continues to run at the same rpm all the time. I've also plugged the pump in another computer with the same results. I have also plugged the fans into the motherboard headers and they still work fine, so we can rule out the fans being the problem. Any help would be very much appreciated.



Cheers!

http://ift.tt/1EuApFZ

Video to show the problem.

H100i Not Showing Up

I've tried to connect the header into 2 different headers and my H100i isn't showing up in Corsair Link. Here is a screenshot http://ift.tt/19tHGbm

K70 RGB new K70 RGB keyboard having a hard time displaying purple

my new k70 RGB keyboard displays any shade of purple that I throw at it as either a blue, or a very white faded blue. i have a RGB mouse that displays purple just fine, so I know its not my eyes. Is this an known issue or is there something I'm doing wrong?

K70/K95 RGB DE MX Blue?

Will there ever be a K70 or K95 RGB Keyboard with MX blue switches and german keyboard layout?

If so: when will it be released?

K70 LED backlight of some keys dim

I got the K70 for almost a year now, I haven't being using the backlight until recently (unfortunately recently had to work late hence turned on the backlight)



anyways... noticed that some of the key's backlight are very dim. dimmer than the backlight on the dimmest level (and they dont seem increase in brightness when I increase the backlight brightness)



I took of the cap of the keys, and it seems to be the LED that are dim...

so what is werid is the keys that are having the issues are scattered all across..



left Ctrl, E, T, PrtScn, Home, Page Down



Any idea why that is? I tried unplugging etc... didn't seem to help... is there a hard reset of something ?

H100i GTX Cooler Temp is zero

I just built a new system, and against my better judgement bought the H100i GTX CPU cooler. I have a commander and cooling node on another computer which I have really given up a couple of years ago because of the state of Corsair Link.



I naively hoped that things would have improved since the last time I visited these forums, but it seems they haven't.



I started by installing the latest version, v3.1.5525. After rebooting and looking through all the irrelevant sensors and devices, I found the H100i GTX stuff. The "Cooler Temp" reports 0 degrees celcius. I guess that that's supposed to be water temperature..? In any case, I doubt it's really 0 degrees as that's way below room temperature. If I watch it for a long time, it will sometimes show a different reading for a very short time, which seems reasonable (e.g. 28 C).



Being used to the way Corsair Link used to work, I started downgrading hoping to find a version that would do what I need. So, I uninstalled and installed v2.7.5361. To my surprise, this wouldn't recognize the H100i GTX at all. So, I had to uninstall this, and reinstall the latest. I didn't try any earlier versions, because I suppose the reason is that the H100i GTX is to "new" for previous versions. That means that I'm stuck with v3.1.5525, which doesn't work.



This again means that I have no sensible regulation of my cooling. The way I is now, I have to switch the fans to "fixed 100%" and the pump to "performance" when I'm doing some heavy stuff, and then switch them back to "quiet" when I'm done. This forfeits the whole purpose of having a sensor driven automatic system.



Is there any way to get the water temp available as a custom curve source, as this is the only way I can see that this setup makes any sense?



I noticed that CL also has a problem reading my CPU temp - a 5820K. It reports 0 degrees as well, and annoyingly flashes red. While it doesn't really matter to me if the CPU temp isn't there, it seems that it might "disturb" the reading of the water temp. If I rightclick the 5820K temp and select "remove device", the "H100i GTX Cooler Temp" will most of the time show a reasonable value for a couple of seconds. But, then Corsair Link autodetects the 5820K temp sensor and adds it again, making me wonder why I have to option to remove it at all. Anyway, as soon as the CPU Temp is back, they both show 0 degrees and flash red.



I guess it could be a problem with the temp sensor in my brand new H100i GTX, but from previous experiences with Corsair Link I'm 99,999% sure it's a software bug. How do I get this working?



The two devices I have under "devices" that's relevant to the H100i GTX is:

1. Corsair Hydro Series 7289 USB Device - version 3.3


2. H100iGTX Cooler - version 2.3.0.0

Trying to update firmware simply reports that "Corsair Link did not detect any devices that need to be updated." That either means that the H100i GTX is at the latest firmware, or another software bug - I simply don't know, but at least it's not an option for me to update firmware to get around the bug.