Hi everyone.
I know these questions have probably been asked a thousand times but I think my issue is ever so slightly different.
Basically, I've built a Hackintosh Pro which has all the bells and whistles and decided to go with the H100i even though I don't dual boot so I can't get the USB services to work.
Anyway, I thought I'd installed everything correctly except that the Radiator and fans wouldn't fit in the case so I had to put the radiator above the motherboard and then the fans above that on the outside of the case.
Booting into the UEFI bios I can see that the pump is working at 2368 RPM with the CPU running at 46degrees which I thought was a bit warm.
Booting into OS X and my idle temp is now down to about 30 but under heavy load, for example, rendering a file in Cinema 4D the CPU is at 100% and the temp hits 100 Degrees. As soon as the render ends, the temp is back down to 30 or so.
I can only assume that it's working but then, if that were true I wouldn't expect the load temp to be so high.
Interestingly, when starting up the computer the fans go all out, but even under heavy load, they never seem to spin that fast. Could that be the problem?
Aside from the obvious suggestion of installing windows (which would mean buying it). Has anyone got any other theories/solutions?
The build is
Corsair 500R Case
32Gb Kingston Hyper Beast Ram at 2200
Samsung EVO SSD * 2
WD Green Drives * 2
Gigabyte GTX 770 4GB
Gigabyte Z87X-UD5-H
Intel i4770K
Also, find attached a link to a pic of the temps under high load
http://ift.tt/1v4gf0R
I know these questions have probably been asked a thousand times but I think my issue is ever so slightly different.
Basically, I've built a Hackintosh Pro which has all the bells and whistles and decided to go with the H100i even though I don't dual boot so I can't get the USB services to work.
Anyway, I thought I'd installed everything correctly except that the Radiator and fans wouldn't fit in the case so I had to put the radiator above the motherboard and then the fans above that on the outside of the case.
Booting into the UEFI bios I can see that the pump is working at 2368 RPM with the CPU running at 46degrees which I thought was a bit warm.
Booting into OS X and my idle temp is now down to about 30 but under heavy load, for example, rendering a file in Cinema 4D the CPU is at 100% and the temp hits 100 Degrees. As soon as the render ends, the temp is back down to 30 or so.
I can only assume that it's working but then, if that were true I wouldn't expect the load temp to be so high.
Interestingly, when starting up the computer the fans go all out, but even under heavy load, they never seem to spin that fast. Could that be the problem?
Aside from the obvious suggestion of installing windows (which would mean buying it). Has anyone got any other theories/solutions?
The build is
Corsair 500R Case
32Gb Kingston Hyper Beast Ram at 2200
Samsung EVO SSD * 2
WD Green Drives * 2
Gigabyte GTX 770 4GB
Gigabyte Z87X-UD5-H
Intel i4770K
Also, find attached a link to a pic of the temps under high load
http://ift.tt/1v4gf0R
Aucun commentaire:
Enregistrer un commentaire