Hi all,
I recently bought an AX760 but unfortunate the fan was sounding like a helicopter with some medium/high pitch sounds (not loud) but you can hear it about 30 cm away from the PC, plus the psu mounts in the front in my case.
Anyway i have returned the unit to the retailer and now have the option of either getting the AXi version or the Same AX version again at more or less the same price. Thus i want to ask people's opinions who have purchased the AXi version as to how noisy is the fan, i have heard it has the Yate loon fan instead of the Sans Ace which the non i has.
Secondly i have heard from some reviewers that the fan spins at 100 % at start up for 10 seconds. Is this the case? Is it really loud in a quite system?
Thirdly the AX760 in hybrid fan mode, the fan turns on at about 70 % load according to your tech specs below.
http://ift.tt/1mHkxXr
On the AXi version the fan turns on at 20% load
http://ift.tt/1k8tdTc
Why the difference?
I thought the AXi version has a DSP hence should be more efficient thus less heat why does it need the fan on at 20 % load where as the non i has the fan on at 70% big difference.
I understand that you can change the fan profile with the link software but if you did this and set the fan speed low wouldn't the psu heat up.
Is the AXi version with the DSP for improved ripple suppression better quality than the non i version., and can it protect your components a lot more as it has a dsp to shut the psu down if the voltage goes out of spec.
I am trying to decide which one to go for? AX is Seasonic and AXi is flextronics. Is flextronics as good as seasonic?
I recently bought an AX760 but unfortunate the fan was sounding like a helicopter with some medium/high pitch sounds (not loud) but you can hear it about 30 cm away from the PC, plus the psu mounts in the front in my case.
Anyway i have returned the unit to the retailer and now have the option of either getting the AXi version or the Same AX version again at more or less the same price. Thus i want to ask people's opinions who have purchased the AXi version as to how noisy is the fan, i have heard it has the Yate loon fan instead of the Sans Ace which the non i has.
Secondly i have heard from some reviewers that the fan spins at 100 % at start up for 10 seconds. Is this the case? Is it really loud in a quite system?
Thirdly the AX760 in hybrid fan mode, the fan turns on at about 70 % load according to your tech specs below.
http://ift.tt/1mHkxXr
On the AXi version the fan turns on at 20% load
http://ift.tt/1k8tdTc
Why the difference?
I thought the AXi version has a DSP hence should be more efficient thus less heat why does it need the fan on at 20 % load where as the non i has the fan on at 70% big difference.
I understand that you can change the fan profile with the link software but if you did this and set the fan speed low wouldn't the psu heat up.
Is the AXi version with the DSP for improved ripple suppression better quality than the non i version., and can it protect your components a lot more as it has a dsp to shut the psu down if the voltage goes out of spec.
I am trying to decide which one to go for? AX is Seasonic and AXi is flextronics. Is flextronics as good as seasonic?
Aucun commentaire:
Enregistrer un commentaire