800d sata3

I want to update my 800d case with the sata 3 hot swap pcb. Unfortunately I got the case in 2011 and it is out of warranty. When I try to order it off this website store, Australia is not listed as a shipping country. When I sign up to http://ift.tt/1iNSfth nowhere in the registration does it ask me to make my own password. I even used the forget password thingy and nothings showing up into my email. I have a vague recollection that back in 2011, Corsair offered the sata 3 pcb free to existing 800d owners if they paid for the shipping. I never got around to it because I didnt have any sata 3 drives at the time.



I tried looking in other places for the sata 3 upgrade kit, both locally and on ebay and no places in Australia it. Even mwave and that other place listed in the corsair store as local places to get it, do not have it. I have found some overseas shops selling it but they have rediculous shipping costs. How can I get sata 3 upgrade kit? I will be upgrading my computer very soon this month and it would be a shame if I have to change cases because I can get sata 3 on the hot swap bays.



Any assistance from corsair on this is appreciated.

Vengeance 2100 Installation Issue

Well, just got a brand new Vengeance 2100 :)

Little bit worried by the hissing noise though :(



And it's recognized as as stereo speaker by Windows 8.1 Pro x64.

Therefore, I downloaded the 2.0.26 drivers.

But I can't install those drivers.

When I choose the destination folder, an alert prompts that I should use a local hard drive. Of course, C is a local hard drive...

And I can't get the drivers installed :(



Thanks for your help

Falsche Schrauben im Lieferumfang der H110

Hallo,

bei meiner neu gekauften H110 AiO müssten eigentlich für die Montage der Backplate 4 Stifte mit einem Innengewinde dabei sein. In das Innengewinde wird dann von vorne (aus Richtung der CPU) der Kühler samt Pumpe aufgeschraubt. Allerdings waren in der Tüte nur ein solch ein Stift und drei normale Schrauben, somit kann ich die H110 nicht montieren. Die Schrauben sind minimal dicker als der Stift, sodass sie auch nicht durch die Backplate passen. Im Handbuch sind die benötigten Stifte als " I " bezeichnet.

Wie kann das eigentlich passieren, dass 3 Schrauben in dieselbe Tüte geraten, obwohl die Schrauben auch nirgendwo anders bei der H110 gebraucht werden?



Ich habe bereits eine RMA-Anfrage gestellt, aber noch keine Antwort bekommen (Nummer: 6487554).

Kann man auch nur die 3 fehlenden Stifte versenden, ohne dass ein langer hin und her schick Marathon der kompletten H110 beginnt? Wäre toll, wenn ich diese bald benutzen könnte.



Hank

Attached Images

2014-06-28 14.26.42.jpg (369.2 KB)

Obsidian 900D static electric problem can not fix

Hi mates, i bought Corsair Obsidian Series 900D Full Tower case from Vatan Bilgisayar PC market in Turkey. Installed all my pc companents. But our mainboard does not work. I replaced maybe 10x but nothing nothing nothing. removed all pc companents and install outside from case, mainbord and system booted. I investigated this problem and someone said, "You have a static electrical problem on your case"

I said pc market support but they can not help me!

I give $500+/- but can not use this?

Anyone can help me?:mad:

Case fan setup starting point with H100i

Hello again, I'm going round in circles with which way to mount my fans and was hoping someone with a similar setup could provide some advice. I've read loads of post and everyone has different opinions!



I have a Coolermaster HAFx case with:

230mm fan on the front as intake

H100i at top with 2x noctua NF-F12 as intake (mounted beneath the rad, so pulling - not sure if push through would be better)

A Noctua NFA-14 top rear as exhaust

A 200m side fan as exhaust to dump air from the graphics card (Sapphire 290 trix)



Does this seem sensible? -I'd prefer to blow air onto the GPU and motherboard but think this would cause too much positive pressure. And if anyone can confirm mounting the H100i fans above rather than below to push, that would be great. (It seems consensus on this forum is pushing through, not pulling - guess the manual illustration is confusing!)



Any advice is much appreciated, I've spent 3 days messing about with the PC now and my better half is starting to roll her eyes ;):

750D Top Fan Vibration (SP120)

Hey everyone. I've been posting this lately, and I cant seem to find a solution for it. I'm literally pulling my hair out. I'm hoping i can get assistance, or someone as dealt with this issue. I recently purchased a Corsair 750D Full Tower Case. Once I realized my H100i could use Push Pull, I immediately bought some Twin Pack SP120 High Performance PWM Fans. I added them to the bottom for push, and left the stock fans up top in pull. Every once and a while I would get a "whine"/"humming" sound coming from the fan as it vibrated off the top of my 750D. It was no biggie, as it was almost temporary.



However, when I noticed the prices dropped for the twin pack of fans, I purchased another two so the fans would match. Now I'm using a total of 4 SP120 HP PWM fans. Once I added the retail SP120's to the top of my H100i, it constantly vibrates the case of my 750D, and it is absolutely annoying as heck. If I press down in the center of the fans, it will go away, but is slightly there (make since?). I absolutely love these fans and the aesthetics of them. But I cant seem to get rid of the vibration bouncing off the case and fan.



I don't own any HDD, except for an SSD. So I know for a fact it isn't causing that. I know people would ask, so I'm pointing that out now.



I went to frozenCPU.com and I noticed they sell XSPC Radiator Gaskets, which help with static pressure, and it also says that it protects it from vibration. I ordered three, and wasted 2 (they are terrible, I hate to say). I had one in between my case and SP120, but the vibration was still there. So now I'm at a dead end trying to end the vibration.



I would really appreciate some help, as I cant find it at all. I have already RMA'd like 2 sets of fans (they were faulty, grinding), so I know for a fact it isn't a bad bearing.

Are we going to see CPU Air Coolers in the future again?

Not a question about a problem, just curious if Corsair will make CPU Air Coolers in the future or if this product segment is discontinued for good?