A long time ago I updated to the new firmware and software and my Corsair Link stopped working.
I was hoping with the new software it would start working but IT HAS NOT!
When I plug it in with 1 thermal sensor and 5 PWM fans I get the following...
Under the system tab the only thing that shows up from the corsair link is the single temperature probe.
The fans spin at a fixed RPM.
--------------
In case you need it my system is as follows...
| RIG#1 i5-4670K 4.8GHz @ 1.34v | Gigabyte Z87 OC Force | Cross Fire AMD 290X water-cooled | XSPC Full Coverage VGA Blocks | Samsung 840 EVo 500GB | Team Group Xtreme 1866 16GB | Ultra x4 1200w PSU | Black Ice GTX480 Extreme | Swiftech MCP-655 D5 pump | DT Water Blocks 5noz CPU Block | Danger Den Pump Resevoir |
I was hoping with the new software it would start working but IT HAS NOT!
When I plug it in with 1 thermal sensor and 5 PWM fans I get the following...
Under the system tab the only thing that shows up from the corsair link is the single temperature probe.
The fans spin at a fixed RPM.
--------------
In case you need it my system is as follows...
| RIG#1 i5-4670K 4.8GHz @ 1.34v | Gigabyte Z87 OC Force | Cross Fire AMD 290X water-cooled | XSPC Full Coverage VGA Blocks | Samsung 840 EVo 500GB | Team Group Xtreme 1866 16GB | Ultra x4 1200w PSU | Black Ice GTX480 Extreme | Swiftech MCP-655 D5 pump | DT Water Blocks 5noz CPU Block | Danger Den Pump Resevoir |
Aucun commentaire:
Enregistrer un commentaire